Beethoven :: essays research papers

It has been called the greatest audio entity one could ever listen to; a song which can pierce the soul of even the most dedicated music-hater: Beethoven’s Ninth Symphony. Not only has it been designated thus; also, as one of the few truly divinely inspired works, one which most men can only marvel at, as they wallow in their appropriate humility. These creations, however, are definitely not the only aspects of entities beyond the scopes of men; there are far more examples, which are seen every day, but often overlooked. I was walking outside, with this song echoing in the recesses of my mind, on a dismal, overcast day in the Autumnal quarter, a day when where the streets blended with the atmosphere, when one could hardly look up without feeling the singe of the wind against one’s face. To me, these days have always conjured up images of some distant, looming storm, some silent tempest which, if not otherwise distracted will soon wreak mayhem and disaster on my environs. This day had an intense air about it, as do others of its ilk. This is most likely the fault of the storm under which it is shadowed, as though it and its inhabitants are uneasy and harrowed about the imminent predator waiting overhead to pounce. As the sky overhead swam with deeper and deeper shades of gray and hopeless black, the song in my mind was reaching some vocal crescendo in the fourth movement, a better foreteller of the gale I could not imagine. While the winds bullied and tormented the defenseless neighborhood, I started for my house. Unexpectedly, as the crescendo was losing speed, a quiet, pacific violin entered the musical fray in my brain, and the entire mood of the symphony mellowed, the winds themselves pacified, seemingly under Ludwig’s fickle dominion. Thinking the storm had passed, I continued blissfully onward to the meadows which were my destination. Again I was assaulted, this time by a different part of the symphony; not too long after the first chorale. This was the startling and almost fearful, but still uplifting, part in which the female and male vocals collided like two huge tidal waves with the power to splinter a fleet of ships with the German Alle Menschen repeated several times. Upon this onslaught of euphony, I turned from whatever I might have been thinking before, and looked at some violently twisting and rising leaves and other debris, and gazed at the playful heavens, again ominous. Annoyed with Beethoven and the cruel elements, I stood there, unmoving; indecisive, not knowing whether to turn around or pursue my present course, I felt the excited chorale still striking

Formation Of Nanocomposite For Ceramic Film Process Engineering Essay

IntroductionWe are Super Solar Sdn Bhd which is a ceramic based company that produces window solar movies. In respond to your petition to integrate the elements of green technology into the day-to-day procedures in the mill, we are subjecting this proposal to upgrade our industry by implementing the construct of green technology into the industry. Before we start let us to give a brief account on nano ceramic movies. Nano ceramic movies are particular movie bed used on difficult stuffs to protect them from wear and tear. They play a large function in maintaining the strength and quality of stuffs such as metals, plastic and many other merchandises used in industrial and consumer applications. Ceramic coatings are typically made up of particular compounds that possess stronger belongingss than regular coating. Compounds in ceramic coatings include carbides, borides, nitrides, and silicides that are difficult plenty to maintain the stuff from roll uping residue and going prone to breakage while in usage. There are two types of ceramic coatings, single-layer and multi-layer. Single-layer coatings are normally applied on already strong stuffs that are non ever exposed to damage, such as PVC plastic and non-metallic merchandises. Multi-layer coatings are used on more delicate merchandises such as fibreglass, metals and other points used for particular research lab or industrial intents. The nano ceramic movie that we produce in our mill is specifically tailored to function as shade or coat for edifice Windowss and vehicles. Our movie ( Solar Tint ) applied straight to the inside of Windowss in a place or commercial concern to organize a protective barrier against the Sun ‘s harmful infrared and ultraviolet radiation. As for automotive movies, the coatings allow a certain sum of Visible Light Transmission, while barricading out of the Sun ‘s infrared heat. The technique we are using to bring forth our nano ceramic atoms is known as Thermal Plasma where the ceramic atoms are heated to high temperature that causes vaporization of the little micron size atoms. Then, to surface the nano ceramic atoms onto Polyethylene Terephthalate or PET movies, the thermic crop-dusting method is used whereby the beginning of heat and energy is a high-temperature plasma. The nano ceramic movies are now formed. Presently there are many issues on natural resources depletion due to industrial procedures. One of the methods to get the better of this job is by implementing the rules of green technology in our industrial procedure. Green technology is the procedure and design of merchandises that conserve natural resources, and impact the natural environment every bit small as possible. The usage of green engineering besides referred as clean engineering is supposed to cut down the sum of waste and pollution that is created during production and ingestion. There are many types of green engineering such as energy, edifice, preferable buying, chemical science and besides nanotechnology. Our focal point is traveling to be chiefly on nanotechnology, efficiency maximization, energy preservation and lastingness. Nanotechnology involves pull stringsing stuffs to the smallest nanometre therefore it can be best to implement green nanotechnology is the usage of green rules in the field. Nanotechnology involves the use of stuffs at the graduated table of the nanometer, one billionth of a metre. Based on this green technology rule, we would wish to present the nano ceramic coating. Nano ceramic coatings provide non merely the usual protection of single-layer and multi-layer coatings, but besides feature thermodynamic belongingss. Nano ceramic window movies are fade and corrosion free, outliving other conventional stuff ( bleached and metals ) based movies by more than 50 % . They are known with the term spectrally selective because they reject blaze and block heat while supplying seeable light and optimal lucidity. Their alone heat control belongingss can merely be exhibited at nano graduated table and the preciseness of the fabrication procedure consequences in a thin bed with even thickness to a ccomplish a uniform, impersonal coloring material tone and public presentation.PROBLEM STATEMENT:Presently, we have been bring forthing nano ceramic movies ( Solar Shade ) used as shade and coat for Windowss in edifices and automotives with the intent of cut downing heat and seeable beam. We have been utilizing the Thermal Plasma procedure to organize nano ceramic atoms of Sn oxide from the majority Sn oxide atoms. These atoms are so used to surface the Polyethylene Terephthalate or PET movies to organize nano ceramic movies. These procedures use up enormous sum of thermic energy and are really dearly-won. There have been programs to cut down the energy ingestion and cost without compromising the quality of the merchandise. Apart from that, the competition in the ceramic movie devising industry is really high and we need to bring forth high quality nano ceramic movies that can run into the demands and demands of our clients. With the on-going argument on the benefits of implementing green engineering in our industrial procedures and programs to better our merchandise quality every bit good as cost decrease, we are doing a proposal to incorporate green engineering in the processing and production of our nano ceramic movies and take necessary steps to do more efficient nano ceramic movies.MethodologyBriefly, being a ceramic based company, we are bring forthing nanoceramic atoms, SnO2 from bulk ceramic atoms utilizing the thermic plasma method and use them to surface Polyethylene Terephthalate, PET movies that we are purchasing from a PET maker. The surfacing stuff that we are utilizing is SnO2 utilizing a thermic crop-dusting method known as Vacuum Plasma Spraying ( VPS ) . And the nano ceramic movies are formed. This films maps as solar heat control window movies for residentials and automotive. In item, the procedures involved are as follows: In nanotechnology, a atom is defined as a little object that behaves as a whole unit in footings of its conveyance and belongingss. Atoms are farther classified harmonizing to size: in footings of diameter, all right atoms cover a scope between 100 and 2500 nanometers.On the other manus, ultrafine atoms are sized between 1 and 100 nanometres. Similar to ultrafine atoms, nanoparticles are sized between 1 and 100 nanometres. Nanoparticles may or may non exhibit size-related belongingss that differ significantly from those observed in all right atoms or majority materials.There are several methods for making nanoparticles, and the method we are utilizing presently is known as thermal plasma which deliver the energy necessary to do vaporization of little micron size atoms. The thermic plasma temperatures are in the order of 10,000 K, so that solid pulverization easy evaporates. Nanoparticles are formed upon chilling while go outing the plasma part. The types of the thermic plasma torch u sed to bring forth nanoparticles are ( RF ) initiation plasmas. In RF initiation plasma torches, energy matching to the plasma is accomplished through the electromagnetic field generated by the initiation spiral. The plasma gas does non come in contact with electrodes, therefore extinguishing possible beginnings of taint and leting the operation of such plasma torches with a broad scope of gases including inert, cut downing, oxidising and other caustic ambiances. The nano atoms that are formed in the earlier measure will now be used as surfacing stuff.There are assorted thermic spraying methods for coating of nano ceramic atoms on the PET movie. One method is vacuum plasma crop-dusting ( VPS ) . As with all plasma spraying methods, the beginning of heat and energy in VPS is a high-temperature plasma. In plasma burner an discharge is produced which heats an inert gas watercourse by ionisation and recombination reactions to temperatures of up to 20,000 K. The stuff to be deposited, in this instance SnO2 is fed in pulverization signifier into this high-energy plasma watercourse with the assistance of a bearer gas. The pulverization atoms are accelerated, heated to a liquefied province and projected at high velocity onto the substrate, which causes them to flatten and organize a lamellar coating. Depending on the continuance of the crop-dusting operation surfacing thicknesses from several ?m to a few centimeter can be produced. Bulk ceramic atoms Nano ceramic atoms Thermal Plasma Vaccum Plasma Spraying PET Films Nano Ceramic FilmFigure 1: Diagram of processing of nano ceramic moviesDiscussionDesign ProcedureBelow is the suggested alteration to the current processing of movie that complies with the rules of Green Technology. The execution of green technology in the procedure and production of nano ceramic movies will give us a positive impact in the hereafter, where we will name the undermentioned impacts at the following pages. The modified nano ceramic movie is named as Green Solar Tint. The modified procedure methodological analysis: Nano ceramic atoms of Tin Oxide formed from the thermic plasma procedure ab initio is replaced by Wet Chemical Process. The PET movies are ab initio coated with nano Tin oxide atoms utilizing the Vacuum Plasma Spraying are now replaced by surfacing bed of TiN ( Ti nitride ) followed by a bed of Tin oxide utilizing the PVD ( Physical Vapor Deposition ) Method.Formation OF NANOCOMPOSITE FOR CERAMIC FILM PROCESSInitially our company used thermic plasma as our procedure to bring forth nano atoms. As our concern about green engineering, we suggested to utilize Wet Chemical Process to bring forth nano atoms. Wet chemical methods enable inexpensive, low-temperature, mass-scale fabrication paths. They produce powdered porous and heavy micro-structures that can non be realized otherwise. In wet-chemical processing, clean nano atom scatterings are deposited on the substrate at, chiefly, ambient conditions. The deposition is followed by a rapid thermic processing intervention to take liquids and organic additives, to change over precursors to the mark composing, and to set up the concluding porous and heavy micr o-structure. In the synthesis of precursor scatterings it is really of import to obtain nano atoms with a near-isometric form and a reasonably narrow atom size distribution, without the formation of secondary agglomerate constructions. In peculiar the latter requires careful control of solution and interfacial chemical science to accomplish proper colloidal stableness, during and after the synthesis procedure.Procedure OF FILM COATING USING TITANIUM NITRIDEPreviously in our ceramics movie procedure, we applied thermic crop-dusting for movie coating. Our old surfacing stuff was Tin oxide entirely. Now as we are suggesting our ceramic movie industry based on green technology, we suggest titanium nitride to be used as our surfacing stuff with a protective bed of Sn oxide. There are few procedures that can be carried out for movie coating. Those are nitriding, thin coat engineerings, thermic crop-dusting and optical maser engineering. Based on our findings sing these procedures, thin co at engineerings is sensible and more convenient to be applied for our ceramics movie industry. Nitriding and thermic spraying need a really high force per unit area and temperature to execute the procedure, where the temperature is capable of transcending boulder clay 20 000 K. Then for optical maser engineering, it requires high tech equipment for surfacing which can be really dearly-won. Hence, we are suggesting the Thin Coat Technology or specifically Physical Vapor Deposition for surfacing procedure.Thin coat engineerings1. The thin coating engineerings used with Ti are PVD ( Physical Vapor Deposition ) these are chemical/physical vapor deposition methods used to fabricate protective coatings. 2. PVD procedures are carried out under vacuity conditions. The procedure involved four stairss: vaporization, transit, reaction and deposition. Evaporation-During this phase, a mark, dwelling of the stuff to be deposited is bombarded by a high energy beginning such as a beam of negatrons or ions. This dislodges atoms from the surface of the mark, ‘vaporizing ‘ them. Transport-This procedure merely consists of the motion of ‘vaporized ‘ atoms from the mark to the substrate to be coated and will by and large be a consecutive line matter. Reaction-In some instances coatings will dwell of metal oxides, nitrides, carbides and other such stuffs. The atoms of metal will so respond with the appropriate gas during the conveyance phase. For the above measure, the reactive gases that can be used is nitrogen which is more abundant compared to methane and O. Deposition-This is the procedure of surfacing construct up on the substrate surface. In our instance, we are surfacing TiN onto the surface of PET movies.Why is our modified procedure better than the initial procedure?Thermal plasma – initial procedure used to bring forth nano atomsThermal plasmas have high temperatures up to15, 000 K because the plasmas are generated at comparatively high force per unit areas where near to atmospheric force per unit area ; they have high densenesss and are considered to be at equilibrium. Since we need a high temperature, we need a higher heat content to bring forth the temperature. In this production method, jobs arise from the residuary coarse atoms. When precursor pulverizations are injected into thermic plasma in which temperature and flow distributions exist both radially and axially, some of the precursor atoms are non evaporated wholly. The non evaporated portion, although little, necessitates an extra station separation procedureWet C hemical Process- modified procedure to bring forth nano atomsThis is the scope of techniques that are most applicable for word picture by light dispersing techniques. These are basically ‘bottom-up ‘ techniques, where they start with ions or molecules and construct these up into larger constructions. These wet chemical science techniques presently offer the best quality nano atoms from a figure of points of position. They produce nano atoms that are already in the signifier of scattering, therefore high inter-particle forces can be designed in to forestall agglomeration. The formation of sums can be reduced or eliminated. The nano atoms can be made to be really same size to within little tolerances. The chemical composing and morphology can be closely controlled.Vacuum Plasma Spraying- initial procedure used to bring forth surfacingThis system, as the name implies, uses an electric discharge as the heat beginning which is much hotter than the temperature produced by an o xy-acetylene fire. This means that higher thaw point stuffs can be deposited at higher speeds ( 200-400 m/s ) taking to high bonded strength in vacuity plasma praying. Hence higher energy ingestion is needed for surfacing procedure. Other disadvantages are that the procedure requires more expensive equipment and that it is non suited for manual operation in instance of power break.Physical Vapor Deposition. – modified procedure to bring forth surfacingPVD coatings are deposited for legion grounds. Some of the chief 1s are improved hardness and wear opposition, reduced clash and improved oxidization opposition. The usage of such coatings is aimed at bettering efficiency through improved public presentation and longer component life. They may besides let coated constituents to run in environments that the uncoated constituent would non otherwise have been able to execute. Materials can be deposited with improved belongingss compared to the substrate stuff. Almost any type of in organic stuff can be used every bit good as some sorts of organic stuffs. The procedure is more environmentally friendly than procedures such as electroplating.TinAs mentioned above, the PET movies are ab initio coated with nano Tin oxide atoms entirely are now replaced by surfacing bed of TiN ( Ti nitride ) followed by a bed of Tin oxide. Why TiN? TiN bearing movie is oxidation-resistant and has first-class scratch opposition. It besides has superior light rarefying features, peculiarly reduced seeable coefficient of reflection and decreased colour. Using TiN as a solar shield on architectural Windowss can cut down the solar heat addition during hot conditions, Ti nitride coating is the most advantageous pick for most applications because of the comparative easiness with which gaseous precursors to the coating can be formed and handled on processing equipment. A solar shade bearing Ti nitride ( TiN ) as the chief barrier is coated with a thin bed of protective transparent movie of Sn oxide. Tin oxide is believed to hold the most favourable combination of mechanical, optical and infra ruddy emmisivity belongingss to complement solar shield applications.Design OF PRODUCT ( Green Solar Tint )AutomotiveBy and large, our improved nano ceramic movies ( Green Solar Shade ) offer better heat rejection, low coefficient of reflection an d better lastingness as compared to the old ceramic movies ( Solar Shade ) that offer limited heat rejection:By cutting down intolerable heat, our nano ceramic movies cool the vehicle more expeditiously and cut down fuel ingestion. Residents are besides protected from the harmful Ultra Violet rays that are damaging to the eyes and tegument through the high Ultra Violet rejection transcending 90 % . Improves the overall comfort of drive, offers fade control and protects the vehicle by widening the life of the vehicle ‘s inside every bit good. High Infra Red heat rejection up to 96 % and auto interior temperature reduced. Reduces blaze and driving weariness therefore heightening driving comfort. Protects drivers/passengers from the Sun ‘s harmful radiation. 100 % dye-free and no stain and estimated to hold longer life rhythm than the conventional dyed and metallic movies. Extends lifetime of vehicle inside with fade protection. Improves shatter-resistance of windshields. Significant heat decrease lowers chilling burden of air-conditioning and fuel ingestion Prolongs lifetime of air-conditioning compressor and reduces replacing costs. Generally helps salvage energy and indirectly saves environment because decrease of fuel ingestion means lesser harmful gases released into the air.BuildingsConventional ceramic movies seem to filtrate out excessively much of the natural visible radiation go forthing their places excessively dark or they let in excessively much visible radiation and capable their trappingss and loved 1s to the detrimental effects of Ultra Violet beams. Whereas, our improved nano ceramic movies ( Green Solar Shade ) :Reduce the Infra-Red heat build-up in the house and besides cut off more than 90 % of the Ultraviolet rays that cause tegument jobs and attenuation of insides. While protecting valuable place trappingss and widening their lifetime, nano-ceramic movies have the added characteristic of low contemplation at dark and the position is hence non obscured. The bed of movie besides provides an added degree of safety by maintaining glass fragments together in the event of inadvertent breakage. Significant Infra-Red Heat rejection lowers chilling burden of air-conditioning ingestion Enhances interior comfort and life environment with reduced blazeCost Analysis for Nano Ceramic Films ( Solar Tint V Green Solar Tint ) .Presently our company bring forthing nano ceramic atoms from bulk ceramic atoms utilizing the thermic plasma method and use them to surface Polyethylene Terephthalate, PET movies by utilizing thermic spray techniques. We are bring forthing 150000 ft2 of nano ceramic movie per batch. The continuance which we took to finish 1 batch is 10 working yearss ( 2 hebdomads ) . The followers is the cost analysis for one batch which affecting production of nano ceramic atoms and besides surfacing procedure. Solar Shade Materials ( RM/KG ) ( Tin oxide + PET movies ) 54,400 Water/Electricity ( RM ) 572,000 Labor ( RM ) 100,000 Maintenance ( RM ) 40,000 Rent ( RM ) 50,000 Entire Cost ( RM ) 816400 The natural stuff which is used to bring forth nano ceramic atoms is tin oxide and about 45000 kilograms of Sn oxide is being used for a batch ( market monetary value 0.68 cents per Kg ) . 20000 KW/h are being used for a batch for making nano atoms and undergo coating procedure. Entire Cost of the production are RM 816400 and our merchandising monetary value is RM 8.50 ( 1 ft2 ) . The overall net incomes from the production per batch are RM 458600 which is about 36 % from the overall gross. Estimated Cost Analysis for ( Green Solar Tint ) The estimated continuance to bring forth 150000 ft2 of Green Solar Tint is 10 working yearss ( 2 hebdomads ) . The followers is the cost analysis for one batch. Cost Analysis NANO CERAMIC FILM Materials ( RM/KG ) ( Tin oxide+ TiN+ PET movies ) 107,000 Water/Electricity ( RM ) 410,000 Labor ( RM ) 100,000 Maintenance ( RM ) 40,000 Rent ( RM ) 50,000 Entire Cost ( RM ) 707,000 The natural stuff which is used to bring forth ceramic movies is tin oxide and about 45000 kilograms of Sn oxide is estimated to be used for a batch ( market monetary value 0.68 cents per Kg ) .The estimated energy ingestion will be 14600 KW/h. Estimated energy ingestion will be lower for Green Solar Tint production compared to Solar Tint because it does n't affect thermic procedures which consume high energy. The estimated energy decrease will be 27 % ( 5400KW/h ) . Entire Estimated Cost of the production are RM 707,000 and our merchandising monetary value is RM 9.00 ( 1 ft2 ) .The overall net incomes from the production per batch are RM 643000 which is about 47.63 % from overall gross.Social and Environmental ImpactsBulidings and placesSocial Impact:The Green Solar Tint removes up to 90 % of the Sun ‘s damaging UV beams, which cause fast attenuation of trappingss, carpets, images and other belongingss and sun harm. So this lengthens the life rhythm of stuff and furniture at p lace. Besides that, Green Solar Tint offers window movies that block basically all harmful UV beams, the taking cause of skin malignant neoplastic disease and other unsafe conditions that impact all ages. With this, we can protect our loved 1s from hamful UV rays.Solar shade besides offers added safety for everyone and anything in the house. In instances of larceny or natural catastrophes like temblors and twister, the solar shade movie is competent at maintaining the broken pieces of glass together. This can avoid or at the really least lessen physical injury to your pets and relations and extra harm to your belongings. Extra benefits include an elegant visual aspect, reduced blaze and improved comfort and the Sun ‘s heat that comes through the window being reflected off.Environmental Impact:Green Solar Tint ‘s capableness to reject important sum of Infra Red heat lowers chilling burden of air conditioning ingestion. This means energy can be saved at place by utilizing lesser air conditioning. And indirectly, we can assist cut down the emision of harmful CFC to the environment.AutomotiveSocial ImpactGreen solar shade is besides efficient in cut downing Sun blaze which is really utile most particularly to the driver ( automotive application ) , since it is really helpful in forestalling oculus strain and weariness. Aside from that, riders will besides detect the auto seats get hot easy doing uncomfortableness to sit on. Through Green Solar Tint, non merely is the upholstery of the auto protected, but the riders are protected as good. Green Solar shade is capable of barricading up to 90 % of UV beams so one time installed on every auto window you can be assured that you and your household are protected from its detrimental effects. Aside from these grounds that are already given, solar shade besides serves as an added shield that facilitates to your safety and security. The movies will forestall broken pieces of glass from shattering in instance of an accident. This will so minimise possible physical injury both from exterior and inside the auto.Environmental ImpactGreen solar shade is besides really efficient in barricading heat from the Sun. This is a really economical manner of salvaging fuel because of decreased use of air con. And less use of air con means less fuel ingestion. This manner we get to salvage our natural resources ( fuel ) every bit good as cut down pollutant emitted by vehicles.DecisionAs a decision, the modified Green solar shade will supply good solar rejection and it is cheaper than Solar shade ( initial merchandise ) .Recommendation1. The natural stuffs that we traveling to utilize for ceramic procedure, should be maximized, so that the merchandises besides will be maximized. Hence, the dimension of the reactors should be design harmonizing to our company penchant. Overall, we can cut down the use of energy by non reiterating the procedure once more. 2. First, the mixture of our natural stuffs in an organic dissolver should be every bit pure as possible. This can be done, by holding an extra procedure of separation and purification of our natural stuffs. As a consequence, we can forestall the wastage. The drosss from the separation, we can re-use it back as our side merchandises. 3. Normally, it is impossible to derive 100 % pureness in our merchandises. There should be some by- merchandises produce. The byproducts can be re-usable or can be re-cycling back to our provender. It is a good investing for our company.Waste PRODUCTSZinc oxide is one of the drosss from our natural stuffs. So, it is non necessary for us to divide the drosss as Zn oxide have a superior UV barricading belongingss compared to its majority replacement. Actually, this dross is frequently used in ties readying of sunscreen lotions and it is wholly photo stable. Impurities or waste merchandises like nanoscale atoms that being produced in our industry can be used for biomedical application as drug bearers or imaging agents. We can do it as our side investings.

The Cons and Pros of University - 821 Words

University for me is where I begin my future career and adapt my learning in this area. The three major changes for me were settling into university life, working in groups and time and stress management. All of these have impacted my university experience and I am going to talk about how. Settling into university life was slightly different for me, because I chose not to move into any residency, so I commuted instead. Commuting for me is a lot cheaper than living in halls and because I don’t live to far away, it seemed logical. However there is still a cost incurred with this, such as petrol and servicing your car. You also have the road traffic to contend with and making sure you leave in adequate time to get to your lecture. I think†¦show more content†¦However I still think it is crucial to have a balance so I do make time for my self. The hardest part for me was organizing my time, as Cottrell says â€Å"Know when and where you should be for scheduled classes, events and tests.† (2012, p.14) And this for me is vital because of the structure and getting into a routine. My next change at university was working in groups and working with new people. This was personally a challenge for me because working with people you don’t know very well can be very daunting due to the fact that you don’t know what strengths people have. Belcher (no date) say’s that â€Å"Working as a team not only helps to showcase peoples various strengths, but can also allow for compensation of weaker areas as well.† Which I agree with, so getting to know your group members was also another thing to consider, in order to find out students strengths and weaknesses. Also when working in groups I think its important that everyone should play an equal part otherwise, as Emclen and Beck suggested â€Å"One member of the group can try to dominate, insisting on his or her point of view and want to take the largest share of presentation time.† (2004) This unfortunately did happen in our group, however we did approach this in a mature manner and decided it best to go around the table for ideas rather than have people shout out. Also in our group the effort wasn’t shared. I felt like I was doing a lot of the work including the arranging for a placeShow MoreRelatedThe Pros And Cons Of Crimes In The Duke University711 Words   |  3 Pages sex assaults, and scandals are not uncommon in sports within a university but when it hit this upscale university it was a major issue. Duke University, located in Durham North Carolina, is considered to be one of the most prestige universities in North America. With a high-profile image and only nine per cent acceptance rate, it was a huge shock when a scandal was brought to light. Back in March of 2006, three white Duke University lacrosse team members were accused of raping a black woman who wasRead Morethe pros and cons of a database management system (DBMS) for a new a newly established multi-campus Mpokeleshi University library in Muchinga province of Zambia.1989 Words   |  8 Pagesassignment is an attempt to present a position paper about the pros and cons of a database management system (DBMS) for a new a newly established multi-campus Mpokeleshi University library in Muchinga province of Zambia. It further gives sufficiently clear arguments to enable the vice-chancellor make an informed decision on the way forward. The paper will first define the major concepts under review before outlining the pros and cons of a database management system (DBMS) and finally give sufficientlyRead MoreThe Pros and Cons of Paying College Athletes Essay660 Words   |  3 Pagescollege athletes continues to be a huge debate in the sports world there are pros and cons for both and both need to be considered in the big decision that the NCAA has to make. There are many pros to paying college athletes. They are unpaid workers, and in big time college athletics, not just football, there are no amateurs. Whenever you get something of value for preforming athletically, you’re a professional.(pros, cons on pay for play). People do believe that the players deserve compensationRead MorePros and Cons of Taking a Year Off Before College Essay example1109 Words   |  5 Pagesaccepted to one, and then go to college right out of high school; or you could do the same thing, but take a year off. This brings up the argument of whether or not a student should take off a gap year before they begin college. There are both, pros and cons to taking a gap year prior to starting college. In this paper, you are going to read about some of the benefits of taking a gap year before college, as well as some of the negative affect of taking a gap year before college. Students should takeRead MoreCan Tests Measure a Student? Essay944 Words   |  4 Pagesno mistakes how are teachers suppose to help their students? Small mistakes are good on a standardized test, since mistakes are what â€Å"give teachers guidance to help them determine what to teach students and when to teach it,† (Columbia University The Pros and Cons Of Standardized Testing) which is where teachers will create ways to help students understand the subject and promote more progress within the students. Not only do these tests examine the progress of students but they also measure theRead MoreI Want to Become a Forensic Psychologist1067 Words   |  4 Pagesand issues relating to law and the legal system.† (An Overview of Forensic Psychology, 2014)The career I want to engage in is forensic psy chologist but first you have to learn the work environment, the education, the earnings, the outlook, the pros, and the cons. â€Å"With numerous portrayals in books, movies and television programs, interest in forensic psychology has grown significantly in recent years.† (An Overview of Forensic Psychology, 2014) The work environment of forensic psychologist variesRead MoreRadio Frequency Identification For The Cosmetics Industry1463 Words   |  6 PagesLuftwaffe. (RFID 2005). This paper is a very brief review of literature about RFID and its pros and cons with respect to the cosmetics industry. Methodology I input the search term RFID into a journal database and got thousands of hits—that s too many to be useful, so I added a limiter: RFID cosmetics. This came back with only a handful, which I m using in this paper. I also input RFID pros cons and got a few more, which I ll also include. The obvious conclusion is that the cosmeticsRead MoreSchool Newspaper, Fanshawe Interrobang ( House, 2013 )1504 Words   |  7 PagesWestern University. Fanshawe is also located further away and the college does not offer free public transit to its students, which would make it much more difficult for students to get to the cafe (House, 2013). Also, as with Western University, many of Fanshawe’s students would not be around the area from May through August, meaning that business would be slow during these months if Greig and Peck choose this segment to target (House, 2013). Target Segment 3: High School Students Pros Cons - StudentsRead MoreIllegal Immigrants Should NOT be Deported Essay example916 Words   |  4 Pageswere to go back tomorrow to wherever they came from everything we know that is agriculture will collapse instantly. The biggest pro of immigration in history is the low wage workers. These low wage workers in the past till now have helped balance the economy a lil more. Now 52 of every 100 migrant workers have illegal status and yet they are hardworking. What are the pros of hard working immigrants? According to The Future of Children immigrant familes have a lot of strengths. First off theRead MoreIntegrating Instructional Technology Essay1226 Words   |  5 PagesRunning head: INTEGRATING INSTRUCTIONAL TECHNOLOGY Integrating Instructional Technology Jimmy L. Burnett, Jr. Grand Canyon University: EDU 225 Instructional Technology July 22, 2012 Technology of the past 20 years has become a focal point of teaching and learning. As a teacher, it is my job to facilitate the learning for an individual by creating an environment that not only conducive for learning, but also places the child in a position to discover

Brief Overview Of Education System Of Pakistan And China...

Brief Overview of Education System in Pakistan Similarities and Dissimilarities in the Higher Education of Pakistan and China Name: Muhammad Saleem I.D Number: M2016127 Subject: Higher Education of China Assigned by: Professor Lee Saiqiang Dr. Han Jiying Semester: First Abstract The purpose of this paper is to fulfill the requirements of a final term paper of the first semester. This paper attempts to put the glance on the Education system of Pakistan and China. Firstly, it aims to introduce briefly the Education system of Pakistan historically and constitutionally. Secondly, it brings similarities in the Higher Education of China and Pakistan. More importantly, the influence of culture on learning styles of both Chinese and Pakistani students in the light of Confucianism and Islam. Finally, it brings dissimilarities in the basic to higher education of Pakistan and China. Introduction Brief overview of Education system in Pakistan Pakistan appeared on the map of the world on 14th August 1947. The Constitution of Islamic Republic of Pakistan (1973) in articles 37 (b) (c) and 25-A state that â€Å"the state will provide free and compulsory education to all children of the age of five to sixteen years within a minimum possible period and the state will remove the illiteracy from country†. The division of responsibilities between the provinces and center are defined by the Constitution of 1973. The Federal Ministry of Education has theShow MoreRelatedWhat’s the purpose of testing nuclear power in India?2001 Words   |  9 Pages India was criticised by some countries such as the United States or Japan and imposed sanctions due to the testing (Mohanty 2013). In response to India’s testing, five nuclear devices were tested and another nuclear device was exploded later by Pakistan (Mohanty 2013). Even though India had some risks such as being imposed sanctions from other countries due to the testing, why did India decide to test nuclear devices? If India tested those devices openly to other nations, India would have moreRead MoreEducation and Economic growth4545 Words   |  19 Pagesbetween education and economic growth in KPK Concept Note: My research is about the educational issues in Kp, I want to identify that education have positive or negative impact on growth in GDP. All around the world in now a day’s education is considered as the most important and working tool in controlling the problems like poverty, economic issues etc. Education is playing a vital role in developing human capital by increasing skills and producing/innovating new technology. Education help’s theRead MoreSwot Analysis Of Business Expansion Into China2596 Words   |  11 PagesAbstract The following is a Research paper on China in order to provide a SWOT analysis for business expansion into China. The report will highlight important factors that may impact your organizations success. Some considerations are in the specific region in China that will best suit your company as well as political, economic and cultural impacts for your line of business. The report will summarize the data your organization will need to be aware of in order to make your business decision.Read MoreHr Department of Ptcl Zonal Office Islamabad10181 Words   |  41 Pages...................3 Executive Summary ........................................................................................5 Chapter 01 ................................................................................................. 10 1.1. Brief History ........................................................................................................ 11 1.2. Nature of the business ........................................................................................ 12 1.3. CorporateRead MoreImpact of Us Aid on Pakistan Economy9402 Words   |  38 Pagesâ€Å"Impact of United States Aid on Pakistan Economy† A thesis Presented to The faculty of Management Sciences Bahria Institute of Management amp;Computer Sciences, Karachi In Partial Fulfillment of the Requirements for the Degree Master in Business Administration Abstract This research paper analyzes the effects of United States aid on the economic growth of Pakistan. The study uses annual data of last ten year for the period 2002-2012. The research study is conduct to check weather united stateRead MoreRise of China as an Economic Power6781 Words   |  28 PagesON: RISE OF CHINA AS AN ECONOMIC POWER Submitted to Submitted by: Mrs. Navjot Kaur Arpandeep Kaur MBA- 1C Roll no: 5218 table of contents * Introduction about china * Economic history of china * Republic of china ( 1911- 1949)Read MoreHow Hiv/Aids Affect Population2855 Words   |  12 Pagessurveys have enabled researchers to lower the previously published HIV prevalence estimates for some countries. But the number of people infected and the effects on their families, communities, and countries are still staggering.1 This policy brief gives an overview of the effects of HIV and AIDS on population size, characteristics, and well-being. It also highlights the major efforts needed to control the epidemic. The pandemic continues to spread worldwide despite prevention efforts and successes inRead MoreUK - Analysis Report31935 Words   |  128 PagesMay 2010 OVERVIEW Catalyst This profile analyzes the political, economic, social, technological, legal and environmental structure in the United Kingdom. Each of the PESTLE factors is explored on four parameters: current strengths, current challenges, future prospects and future risks. Summary Key findings Strong democratic system, but the threat from terrorism continues to be high The UK adheres to a democratic, parliamentary system of governance known as the Westminster system. The structureRead MoreIndias Five Years Plan6466 Words   |  26 Pageserstwhile Soviet Union in 1928 for controlled and rapid economic development. Much of the Soviet industrial successes are a result of the implementation of its five year plans. In 1950, India’s prime minister Jawaharlal Nehru, impressed by the Soviet system, adopted five year plans as a model for economic development, and established the Planning Commission which was to act independent of any cabinet and was answerable only to the Prime Minister, who is also Chairperson of the commission. Draft plansRead MoreExport And Import Strategy For The Shipping Lines1045 Words   |  5 Pagessupply. Dry bulk cargo constitutes of two main commodities: iron ore and coal. Iron ore trade is largely driven by the demands of the Chinese steel industry. Chinese iron ore demand remained strong in CY 2007. As 83% of India’s iron ore exports are to China, the trade volumes arising out of India will also depend, to some extent, on the prospects of Chinese steel industry. The demand for coal is expected to remain strong from the Asian countries. The orderbook position at the beginning of 2008 seemed

Comparing Tomorrowland, Produced And Directed By Brad Bird

Introduction One idea can influence the world, but how far can that idea go if it is spread by one person? Could an idea also present a reality better than the one humanity is accustomed to today? The 2015 film Tomorrowland attempts to reveal the answers to these questions in the real world as well as in an alternate dimension where humanity has a different outlook on the future. Tomorrowland, produced and directed by Brad Bird, follows Casey and Frank. Casey is a teenager who seems to be one of the only people in the world with the desire to find positive ways to affect the future. Everyone around her, from her father to her teachers, are complacent towards anything bad that can affect them. She is approached by the robot Athena, who introduces her to an alternate version of reality called Tomorrowland, where mankind creates technologies surpassing those of the real world by centuries. Athena explains that Casey’s world is in trouble and that they must go to Tomorrowland to save it. In order to get there, Casey and Athena need help from Frank, a pessimistic recluse who used to live in Tomorrowland. He shows Casey one of his inventions in his home that predicts the world will end with 100% certainty. However, when Casey refuses to accept what Frank’s machine says, the 100% chance briefly drops. This convinces Frank that Casey might be able to sa ve the planet from catastrophe, and takes her and Athena to Tomorrowland. There, Casey finds out that everyone in Tomorrowland,

Development Study Free Essays

Development study is a branch in social sciences that explores issues relating developing countries. Historically it has focused on social and economic development therefore may extend its significance to other regions and communities apart from concentration on the developing world. There are various approaches that conceptualize development studies. We will write a custom essay sample on Development Study or any similar topic only for you Order Now Among them are the modernization and dependency theories. This paper focuses to explore their similarities and difference in their significance to development studies. Dependency theory is a social science approach that argues that the developed nation draws resources from underdeveloped nations making them richer at the expense of their counterparts. The proponent of this theory is Sandra Ball-Rokeach and Milvin Defleur (1976). Dependency theory initially was in the communication discipline but merged out integrating several prospects. It merges prospects from psychology from social category theory, from causal approaches, media effects and traditions as well as contextual philosophy. â€Å"in its urge to appropriate productive forces for the purpose of exploitation, capital ransacks the entire world, provides itself with the means of production from all corners of the earth, obtaining these from all levels of civilization and from all forms of society† (Perry 1996. p. 35) It sometimes referred to as underdevelopment theory based upon Marxist theory in other words, it assumes that wealth western nation uses their superior status to exploit peripheral weaker nations reflecting earlier colonial bonds. These under developed nations expose their economical and political structure maintaining their reliance on developed nations. They become developmentally enslaved mastered by the west. Some argument exist that tourism has evolved somehow reflecting economic dependency and colonialism. However, potential underdevelopment resulting from dependency is the main focus. (Bramswell 2004. p. 323) Modernization on the other hand argues that low economically empowered societies can develop if only they seize from their traditional methods and adapt to modern technologies, cultural values and economic institutions that puts an emphasis on productive investment and savings. The social institutions and traditional values of low income nations hinder their effectiveness in economy. Most of people in undeveloped society have low work ethics, they usually consume without thinking of investing in the future. Most of these societies have large families therefore saving money for investing is almost impossible. They therefore rag behind in their economic ability (Griffiths Giddens 2006 p . 405) Modernization tends to criticize Marxist theory. It emphasizes the process of change and the reason to that change. Marquis de Condorcet is among the proponents of this theory. His argument was that, people’s cultural values and morals in the society can be changed by economical and technological advancement. He encouraged technological advancement arguing that it helps society have control to the environment and adapt to it. He argued that technological advancement encourage social progress. (Soylent communications 2008) Modernization theory contrasts the dependency theory in a number of ways. In many parts of the world where it have ever been applied, it has failed to take into account historical and social factors influencing development. Such factors are like the traditional social structures, colonialism, and religious factors. Natural past outcomes have also not put into account and which may have affected a society; famine, floods, volcanic activities and other natural environmental conflicts. Many nations like the Middle East historical process influenced its development. It emphasis on modern values in development cannot be fully relied as the back born to development. The historical processes in politics, economic, cultural, educational of a society influence its development. Development theory argument that richer nations exploits less developed nations natural resources contrast the free market that advances poor states to full economic growth. The international market gives every nation an opportunity to realize it full economic growth. It is through this freedom that a society can take advantage to purchase modern values that can help it develop. A poorer state can purchase new technological advancement improving production in its industries which in return will improve it economy. However, dependency theory contrasts this situation arguing that it is exploitation. Dependency theory argument that colonialism of undeveloped nations still exist is a contrast to modernization. In the previous century, many undeveloped countries evoked from colonialism after realizing their independence. This independence was not granted to just political matters but also to the economy and social structures. Most of these nations have their natural resources still fully unexploited. Not because their former colonial master have not exploited these but because they lack modern facilities which would help them. This therefore is a contrast to modernization. The continued reliance on colonial masters should not be argued as a modern colonialism. It is evident that the colonialist had an influence politically, economically and socially to their colonies. Therefore, these nations will tend to consult their colonial masters as well as trade with them even in the modern world. Contrast between dependency theory and modernization exist in their views on international dimensions that influence economic development of a nation. These dimensions include tourism, trade, global investment and many others. Dependency argues that tourism, free trade and global investment are a reflection of the dependency that exists between the developed and undeveloped world. Most of the global investors are from the developed world. This is also in tourism. Dependency theory proponents argues that this is a clean indication of how developed nations exploits the less developed for their growth. Modernization on the other hand views this kind of relation to enhance purchase and adoption of modern technologies. Trade exposes undeveloped countries acquire modern technology. In enhancing tourism, the undeveloped countries adopt new technology to maximize turn outs. Though global investors’ targets at making profits, they as well enhance modernity in less developed nations. Dependency theory puts into accounts exogenous and indigenous political processes which have a role in national continuity and formation. It puts into account changing circumstances like religious background of nation. However, modernization contrasts this as its main emphasis is on new technology influence on development. Its notion of class difference which challenges it universality contrast dependency theory. In addition, modernization ignores rural poverty, unemployment, inflation, economic and political dependency and the growing gap between the poor and the rich. This contrasts dependency theory. (Paidar 2005) Though these two theories contrast, their arguments are both very effective in development studies. Development in a society is a complex issue which primarily may depend on modernization and dependency theory as well as other concepts in the society. Whichever perspective one would take, development is about the nature of a society economic, political and social ability. However if modernization and dependency theories are merged, they would have a more efficient development studies description on a particular society. How to cite Development Study, Papers

Quality Management Globalization

Question: Write about theQuality Management for Globalization. Answer: Introduction Globalization has a full impact in the workplace. It tends to create more diverse working environment for the employees and the organization. It has both positive and negative impact on the employees productivity. Small and large business organizations have to adopt new policies and guidelines to keep up with the changing global environment. Globalization has become more prevalent in multinational organizations (Luthans and Doh, 2009). These companies have to deal with the increasing cultural diversity. These changes create a huge pressure over the owner to adopt new guidelines and policies. The managers have to deal with the increasing workplace diversity. There is a lot of difference in work ethics and religions across world. This has increased cultural diversity also produced multifold benefits for global companies. These changes provide a new insight into the cultural differences through management point of view (Czinkota et al 2009). With the changing era companies have now a quick access to the global employees? Outsourcing has changed the overall process of work management. The world has adopted the changes occurring in the global platform. It has a direct impact on the large countries as more companies are embracing the outsourcing trends. This is creating a greater profit margin for the companies. Cultural diversity at workplace has created a need for more employees training. The manager has to provide new training and development programmes for both the new and old employees. This has created wider cultural disparity between people. Some employees prefer lesser cultural interaction at workplace (Daniels, et al 2009). Effects of Globalization and Total Quality Management Companies established in the third world have to adopt western standards to provide an effective work environment. This has helped in creating a direct impact on the jobs available. This has helped in creating safe condition for the employees. There is an increase in concern over workers safety in larger companies (Hill, Cronk, and Wickramasekera, 2013). TQM the company helps in ensuring the direct impacts on the business. Globalization is extremely demanding for a business organization. TQM ensures that the customers needs are guaranteed. If a company has implemented total quality management tools, it will surely attain success on long run. Overall quality can only be ensured if tools are deployed efficiently. Globalization has created an impressive conditions and standards for the third world countries by improving technology. The negative impact of globalization has also affected the environment. Globalization is indirectly causing deforestation, water pollution, and climate changes. Companies are deciding to expand their business function. Countries with a cheaper labor also tend to environmental protection. Companies are setting up their production unit in the third world country due to availability of resources at a cheap rate (Fuchs, 2007). The houses are surrounded with the production unit which is directly affecting the local environment. There are both positive and negative impacts of globalization on different countries. It is largely seen that globalization has been creating a wide scope for both the current and future growth of the organization (Alexander and Doherty, 2009). It is largely been impacting the procedure to carry out work. Business organization nowadays understands the wide scope of activities. It is affecting both the organization and the productivity. Large sized multinational organizations are promoting inter-cultural relationship among the countries. This overall procedure is helping in developing effective opportunities not for the host company but for the home country. Globalization has overall helped in increasing opportunities for the different organizations. It is evident from the current market situation that company whether big or small is planning to attain a huge size (Cavusgil, et al 2014). This can only be attained through multi-fold practices. Large sized business organizations are mov ing to other countries to attain maximum benefit. Quality management meanwhile has become an important aspect need to be taken care to derive effective results. Quality management is the main purpose of the business organization throughout the world. Quality management is necessary for the organization to derive effective results in order to manage the relationship between employees. Globalization need to be positive enough for the purpose of attaining long term productivity. This is necessary in the goodwill of the organization to maintain procedure and principles to derive growth (Wiersema and Bowen, 2008). The role of every individual participating in the work is necessary to be judged before making further advancement. It is necessary to understand the role of person in deriving results on the long term basis (Wild, Wild and Han, 2014). Role of Customers Globalization is related to integrating economy to attain desired results. Globalization has increase the level of consumer awareness in the individual. Customers nowadays are aware about the label and brand they are using. They are nowadays switching to multinational brands which have developed a huge competition in the local market. The local stores are now gearing up with the situation. They are now taking care of the quality to promote their interest. Unsatisfied customers switch to other brand (Johnson and Turner, 2010). Role of Employees The employees need to diversify their role in an effective way. They have to create an effective role due to arrival of high market standard. The organization is now attracting skilled, creative and innovative forces to derive high productivity. The employees need to identify the extreme possibilities. There is a necessity to change the administrative role so as to manage the quality. The HR manager needs to ensure high quality at work. It is evident for the organization to provide high knowledge and skills so as to derive high performance. Management possesses information and activities that need special attention in order to attain long term sustainable results (Baylis, Smith and Owens, 2013). Role of Organizational Culture An organization is made up of complex set of ideologies. It exists in a variable environment. This directly affects the productivity of the employees. The role of globalization can be seen in the organizational culture and behavior. It is due to advancement of technology and global atmosphere. Globalization poses a significant impact on the behavior of an individual. The organizational culture need to be transformed according to the needs and requirement of the company. The overall process requires creation of beneficiary activities to develop quality of work. The purpose of globalization is to attain high level of efficacy. This is only possible if the organization adopt the foreign culture in a quick manner. The development of new goals and opportunities will be fruitful for the organizational culture and development. The growing acceptance of globalization has helped in creation of effective policies not only for one organization but for other as well. Though there is a tendency t o create autonomy among the company in the host country. Most of the functions are carried on the basis of organizational culture in foreign land (Hirst, Thompson and Bromley, 2015). Role of Business Partners It is very essential for a company to pick a global partner to maintain high level of efficacy. To attain a comprehensive edge in the global market partners play a major role in maintain high productivity. A strategic partnership is important for an organization to attain maximum results. Collaboration plays an important role in managing effective results. In this manner the quality can be assured in oversea market. Expansion is only possible if the partners are made in an effective manner. Productivity is only possible if a company focus on partnership (Johnson and Turner, 2010). Conclusion To conclude it is evident to mention the role of globalization in present scenario. The world can only attain significant growth if the proper methodology is attained. Globalization has become more prevalent in multinational organizations. These companies have to deal with the increasing cultural diversity. The overall purpose of globalization is to attain high efficacy. Organizations these days are focusing on deriving high productivity. Every individual related to the organizations are the major players. The role of globalization is expanding in the current business scenario. In such a situation it is recommended to adopt effective policy and procedures for multi-fold growth of the organization. References Alexander, N. and Doherty, A.M., 2009.International retailing. Oxford University Press. Baylis, J., Smith, S. and Owens, P., 2013.The globalization of world politics: an introduction to international relations. Oxford University Press. Cavusgil, S.T., Knight, G., Riesenberger, J.R., Rammal, H.G. and Rose, E.L., 2014.International business. Pearson Australia. Czinkota, M.R., Ronkainen, I., Moffett, M.H., Marinova, S. and Marinov, M., 2009.International business. Wiley. Daniels, J.D., Radebaugh, L.H., Sullivan, D.P. and Salwan, P., 2009.International business. Pearson Education India. Fuchs, D.A., 2007.Business power in global governance. Boulder, CO: Lynne Rienner. Hill, C.W., Cronk, T. and Wickramasekera, R., 2013.Global business today. McGraw-Hill Education (Australia). Hirst, P., Thompson, G. and Bromley, S., 2015.Globalization in question. John Wiley Sons. Johnson, D. and Turner, C., 2010.International Business: Themes and issues in the modern global economy. Routledge. Luthans, F. and Doh, J.P., 2009.International management: Culture, strategy, and behavior. New York, NY: McGraw-Hill Irwin. Wiersema, M.F. and Bowen, H.P., 2008. Corporate diversification: The impact of foreign competition, industry globalization, and product diversification.Strategic Management Journal,29(2), pp.115-132. Wild, J., Wild, K.L. and Han, J.C., 2014.International business. Pearson Education Limited.